|
|
|
Underfloor Heating - Autonomy of Spaces-Compensator
|
|
|
The underfloor heating system provides us with the option of controlling the temperature of each room independently, as best suits our needs!
For complete control, we must have:
- Space thermostat, which reacts to temperature changes with up to 0.1oC accuracy, and we thus achieve the desired space temperature.
- Thermoelectric actuators which are connected through the distributor with the corresponding thermostat and open or close the underfloor heating circuits. We can connect up to four thermoelectric actuators with one space thermostat. In this way we achieve independency in all the areas of a house and as a result more economical operation and selection of different temperatures in each heating space.
- The communication base – distributor which is controlled by the thermostats and is connected to the thermoelectric actuators on the manifold to open and close the circuits depending on the desired temperature in each space.
- Circulator activator which starts or stops the circulator with the required time delay when the thermostats give start and stop heating commands to the thermoelectric actuators.
- An intelligent and flexible solution for cases when we wish to install separate thermostats at a later date to control the desired temperature in each space without the need of installing communication cables, is the wireless thermostat communication system. Thermostats operate as transmitters and the base as receiver, giving commands to the thermoelectric actuators on the manifold to open and close the circuits without the use of wires.
- Compensator systems are available for automating the control of the operation of underfloor heating. A compensator recognizes ambient temperature with a sensor and interacts with the three-way mixing valve and the heating circulator. In this way we prevent the system’s inertia according to the environment’s temperature changes, achieving more economic operation of the heating.
|
|
|